---

On this week’s present, we’re sharing some sensible suggestions, plus some info on a brand new and classy materials for driveways.

---

Contemplating a Rubber Driveway

Not many corporations set up rubber driveways, however that might change within the close to future. Within the U.S. alone, 280 million tires are disposed of yearly, and many individuals are looking for methods to recycle them. 

Rubber driveways are sturdy, nearly maintenance-free and slip-resistant. The typical price of poured-in-place rubber is about $7-15 per sq. foot, in line with HomeAdvisor.com. For comparability, concrete is about $1-2 per sq. foot and asphalt is $2-5. Due to the recycled supplies, rubber driveways lose coloration extra shortly and require extra frequent resurfacing. Seek the advice of with a contractor to see what choices can be found.

Skip to [1:05:41] for the total section on the At the moment’s Home-owner Radio Present. 

---

How you can Take a look at to See if a Fluorescent Bulb is Good

Although LED lights are steadily changing fluorescent bulbs, there are nonetheless tens of millions of them on the market. 

To see if a fluorescent bulb continues to be good, use a multitester (also called a multimeter or volt/ohmmeter). Rotate the tester’s knob over to the ohm setting, take the 2 probes on the tip of the wire and contact them to the 2 probes on the tip of the fluorescent bulb. Two ohms or larger means the bulb continues to be good.

For those who see a black patch on the bulb’s filament, this implies the bulb is now not working. 

Skip to [35:41] for the total section on the At the moment’s Home-owner Radio Present.

---

Tip for Portray Doorways

Longtime listener Mark from Palatka, Fla., shares his tip for portray doorways. 

You want three 3-inch screws. Screw one screw on the highest of the door into the jamb about an inch and a half. Then on the underside jamb, screw the 2 different screws close to the skin edge, leaving about an inch-and-a-half uncovered. 

Subsequent, put the door in your sawhorses utilizing the screws to carry it. Paint one aspect, seize the 2 outer screws, then rotate the door to color the opposite aspect. You are able to do this with exterior or inside doorways. 

Skip to [26:29] for the total section on the At the moment’s Home-owner Radio Present.

---

Save a Glove, Pinch a Penny

As a result of rubber gloves are so low-cost, it’s simple to switch them. Nonetheless, in case you’re trying to pinch some pennies, right here’s a tip to avoid wasting a pair. Merely purchase a tube of adhesive to patch the outlet. 

Flip the glove inside out, clear the world across the gap with rubbing alcohol, and await it to dry. Then unfold the adhesive on and past the outlet by a few half-inch. If that fails, you will have to switch the gloves. 

Skip to [14:55] for the total section on the At the moment’s Home-owner Radio Present.

Additionally on this episode:

• Greatest Base for a Plastic Shed
• Methods to Insulate a Cinderblock Storage
• Putting in Laminate Flooring and Baseboards
• Get Granite Counter tops with out the Sticker Shock

---

This Quick-Drying Paint is Scuff-Resistant and Stain Repelling. Study extra>>

---

Different Merchandise and Hyperlinks Talked about

---

Additional Studying

---